Stainless steel casters & stainless steel wheels - POES series

With ‘Blickle SoftMotion’ soft rubber tire and nylon wheel center

POES – Wheel and caster series with Blickle Besthane Soft polyurethane tread

The wheels in the POES series consist of a high-quality ‘Blickle SoftMotion’ elastic solid rubber tyre vulcanised onto a black and impact-resistant nylon wheel center. The non-marking grey wheels in the POES series with a hardness of 55 Shore A provide excellent floor preservation, low noise operation and a low level of rolling resistance. The thick tread with its specially adapted tread contour allows the wheels to be used in applications involving significant lateral loads.

From the service trolleys to the transport of shock-sensitive components – the ‘Blickle SoftMotion’ soft rubber series provides a new operating experience.

  • POES – Stainless steel swivel casters with plate
    Swivel casters with plate - stainless steel casters POES series

    As standard, the wheels in the POES series are available with the following stainless steel rig series with top plate fitting:

    LEX series: Stainless steel swivel rig with top plate fitting

    A detailed description of this bracket series is available in the guide. The brake systems available for each base product are listed in the relevant section.


    		Wheel Ø

    [inch]    		 Wheel
    width
    [inch]    		 Load capacity
    at 2.5 mph
    [lbs]    		 Bearing type


    		 Total height

    [inch]    		 Plate
    dimensions
    [inch]    		 Bolt hole
    spacing
    [inch]    		 Bolt
    hole Ø
    [inch]    		 Offset

    [inch]
    LEX-POES 150XKA-14-SG 6 2 615 ball bearing (CC) 7 ¹⁄₂ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈
    LEX-POES 200XKA-14-SG 8 2 660 ball bearing (CC) 9 ¹⁄₄ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈
    To the product finder
  • POES – Stainless steel rigid casters
    POES stainless steel rigid casters

    Blickle also provides suitable castors with a stainless steel fixed bracket for the swivel castor with top plate fitting:

    BESX series: Stainless steel rigid rig with top plate fitting


    		 Wheel Ø

    [inch]    		 Wheel
    width
    [inch]    		 Load capacity
    at 2.5 mph
    [lbs]    		 Bearing type


    		 Total height

    [inch]    		 Plate
    dimensions
    [inch]    		 Bolt hole
    spacing
    [inch]    		 Bolt
    hole Ø
    [inch]
    BESX-POES 150XKA-14-SG 6 2 615 ball bearing (CC) 7 ¹⁄₂ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3
    BESX-POES 200XKA-14-SG 8 2 660 ball bearing (CC) 9 ¹⁄₄ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3
    To the product finder