Small caster wheels - PATH series
With thermoplastic polyurethane tread and nylon wheel center
The tread of the PATH series is made of high-quality thermoplastic polyurethane with a hardness of 94 Shore A. This is cast onto the high-quality nylon 6 wheel center and forms a strong chemical bond. It is also non-marking and non-staining. The PATH series is characterised by very low rolling and swivel resistance.
The PATH series is used for tool trolleys, dollies and hygiene applications in the food industry and elsewhere.
-
PATH – Wheels
The wheels in the PATH series are available in sizes 2 to 5 inch as standard. Blickle provides ball bearing and plain bore versions. The wheels are also available in an electrically conductive version or with ball bearing seals.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]PATH 50/8G 2 ³⁄₄ 165 plain bore ⁵⁄₁₆ ⁷⁄₈ PATH 50/6KF 2 ³⁄₄ 165 ball bearing (C) ¹⁄₄ ⁷⁄₈ PATH 75/8G 3 1 220 plain bore ⁵⁄₁₆ 1 ⁵⁄₃₂ PATH 75/6KF 3 1 220 ball bearing (C) ¹⁄₄ 1 ¹⁄₄ PATH 80/12G 3 ¹⁄₈ 1 ¹⁄₄ 330 plain bore ¹⁄₂ 1 ³⁄₈ PATH 80/8KF 3 ¹⁄₈ 1 ¹⁄₄ 330 ball bearing (C) ⁵⁄₁₆ 1 ⁷⁄₁₆ PATH 80/8-46KF 3 ¹⁄₈ 1 ¹⁄₄ ball bearing (C) ⁵⁄₁₆ 1 ¹³⁄₁₆ PATH 101/12G 4 1 ¹⁄₄ 440 plain bore ¹⁄₂ 1 ³⁄₈ PATH 101/8KF 4 1 ¹⁄₄ 440 ball bearing (C) ⁵⁄₁₆ 1 ⁷⁄₁₆ PATH 126/12G 5 1 ¹⁄₄ 550 plain bore ¹⁄₂ 1 ³⁄₈ PATH 126/8KF 5 1 ¹⁄₄ 550 ball bearing (C) ⁵⁄₁₆ 1 ⁷⁄₁₆ -
PATH – Swivel casters with plate
The wheels in the PATH series are available with the following rigs with top plate fitting.
LPA/LKPA series: Light duty swivel rig with top plate fitting
A more detailed description of the rig series is available in our guide. The brake systems for each base product are listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LPA-PATH 50G 2 ³⁄₄ 165 plain bore 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 ⁷⁄₈ LPA-PATH 50KF 2 ³⁄₄ 165 ball bearing (C) 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 ⁷⁄₈ LPA-PATH 75G 3 1 165 plain bore 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ¹⁄₈ LPA-PATH 75KF 3 1 165 ball bearing (C) 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ¹⁄₈ LKPA-PATH 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ LKPA-PATH 80KF-12 3 ¹⁄₈ 1 ¹⁄₄ 265 ball bearing (C) 4 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ LKPA-PATH 80KF 3 ¹⁄₈ 1 ¹⁄₄ 265 ball bearing (C) 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ LKPA-PATH 101G 4 1 ¹⁄₄ 265 plain bore 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ LKPA-PATH 101KF-12 4 1 ¹⁄₄ 265 ball bearing (C) 5 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ LKPA-PATH 101KF 4 1 ¹⁄₄ 265 ball bearing (C) 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ LKPA-PATH 126G 5 1 ¹⁄₄ 265 plain bore 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ LKPA-PATH 126KF-12 5 1 ¹⁄₄ 265 ball bearing (C) 6 ⁵⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁹⁄₁₆ LKPA-PATH 126KF 5 1 ¹⁄₄ 265 ball bearing (C) 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 1 ⁹⁄₁₆ -
PATH – Swivel casters with bolt hole
As an alternative to other fitting types, the wheels in the PATH series are also available with the following rig series with a bolt hole fitting.
LRA/LKRA series: Light duty swivel rig with bolt hole
A detailed description of this rig is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LRA-PATH 50G 2 ³⁄₄ 165 plain bore 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ ⁷⁄₈ LRA-PATH 50KF 2 ³⁄₄ 165 ball bearing (C) 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ ⁷⁄₈ LRA-PATH 75G 3 1 165 plain bore 3 ⁷⁄₈ 1 ¹¹⁄₁₆ ³⁄₈ 1 ¹⁄₈ LRA-PATH 75KF 3 1 165 ball bearing (C) 3 ⁷⁄₈ 1 ¹¹⁄₁₆ ³⁄₈ 1 ¹⁄₈ LKRA-PATH 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ LKRA-PATH 80G-11 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ LKRA-PATH 80KF 3 ¹⁄₈ 1 ¹⁄₄ 265 ball bearing (C) 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ LKRA-PATH 80KF-11 3 ¹⁄₈ 1 ¹⁄₄ 265 ball bearing (C) 4 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ LKRA-PATH 101G 4 1 ¹⁄₄ 265 plain bore 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ LKRA-PATH 101G-11 4 1 ¹⁄₄ 265 plain bore 5 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ LKRA-PATH 101KF 4 1 ¹⁄₄ 265 ball bearing (C) 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ LKRA-PATH 101KF-11 4 1 ¹⁄₄ 265 ball bearing (C) 5 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ LKRA-PATH 126G 5 1 ¹⁄₄ 265 plain bore 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ LKRA-PATH 126G-11 5 1 ¹⁄₄ 265 plain bore 6 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ LKRA-PATH 126KF 5 1 ¹⁄₄ 265 ball bearing (C) 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ 1 ⁹⁄₁₆ LKRA-PATH 126KF-11 5 1 ¹⁄₄ 265 ball bearing (C) 6 ¹⁄₄ 2 ¹⁄₄ ³⁄₈ 1 ⁹⁄₁₆ -
PATH – Swivel casters with threaded pin
The PATH series is available with the following rig series with a threaded pin fitting type:
LRA/LKRA series: Light duty swivel rig with threaded pin
A detailed description of the specific features of the LRA and LKRA series is available in our guide
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Thread
Pin
length
[inch]Offset
[inch]LRA-PATH 50G-GS10 2 ³⁄₄ 165 plain bore 2 ¹¹⁄₁₆ M10 1 ³⁄₁₆ ⁷⁄₈ LRA-PATH 50KF-GS10 2 ³⁄₄ 165 ball bearing (C) 2 ¹¹⁄₁₆ M10 1 ³⁄₁₆ ⁷⁄₈ LRA-PATH 75G-GS10 3 1 165 plain bore 3 ⁷⁄₈ M10 1 ³⁄₁₆ 1 ¹⁄₈ LRA-PATH 75KF-GS10 3 1 165 ball bearing (C) 3 ⁷⁄₈ M10 1 ³⁄₁₆ 1 ¹⁄₈ LKRA-PATH 80G-GS12 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ LKRA-PATH 80KF-GS12 3 ¹⁄₈ 1 ¹⁄₄ 265 ball bearing (C) 4 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ LKRA-PATH 101G-GS12 4 1 ¹⁄₄ 265 plain bore 5 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ LKRA-PATH 101KF-GS12 4 1 ¹⁄₄ 265 ball bearing (C) 5 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ LKRA-PATH 126G-GS12 5 1 ¹⁄₄ 265 plain bore 6 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ LKRA-PATH 126KF-GS12 5 1 ¹⁄₄ 265 ball bearing (C) 6 ¹⁄₄ M12 1 ³⁄₁₆ 1 ⁹⁄₁₆ -
PATH – Swivel casters with plug-in stem
PATH wheels can be combined with the following rig series with a plug-in stem fitting type:
LRA series: Light duty swivel rig with plug-in stem
The properties of this series are described in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Pin Ø
[inch]Pin
length
[inch]Offset
[inch]LRA-PATH 50G-ES 2 ³⁄₄ 165 plain bore 2 ¹¹⁄₁₆ ⁷⁄₁₆ 1 ³⁄₁₆ ⁷⁄₈ LRA-PATH 50KF-ES 2 ³⁄₄ 165 ball bearing (C) 2 ¹¹⁄₁₆ ⁷⁄₁₆ 1 ³⁄₁₆ ⁷⁄₈ LRA-PATH 75G-ES 3 1 165 plain bore 3 ⁷⁄₈ ⁷⁄₁₆ 1 ³⁄₁₆ 1 ¹⁄₈ LRA-PATH 75KF-ES 3 1 165 ball bearing (C) 3 ⁷⁄₈ ⁷⁄₁₆ 1 ³⁄₁₆ 1 ¹⁄₈ -
PATH – Rigid casters
The PATH series is available with the following rigid rigs for the available swivel casters:
BPA/BKPA series: Light duty rigid rig with top plate fitting
BRA/BKRA series: Light duty rigid rig with bolt holeA detailed description of the rig series is available in the guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]BPA-PATH 50G 2 ³⁄₄ 165 plain bore 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 BRA-PATH 50G 2 ³⁄₄ 165 plain bore 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ BPA-PATH 50KF 2 ³⁄₄ 165 ball bearing (C) 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 BRA-PATH 50KF 2 ³⁄₄ 165 ball bearing (C) 2 ¹¹⁄₁₆ 1 ¹¹⁄₁₆ ³⁄₈ BPA-PATH 75G 3 1 165 plain bore 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 BRA-PATH 75G 3 1 165 plain bore 3 ⁷⁄₈ 1 ¹¹⁄₁₆ ³⁄₈ BPA-PATH 75KF 3 1 165 ball bearing (C) 3 ¹⁵⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 BRA-PATH 75KF 3 1 165 ball bearing (C) 3 ⁷⁄₈ 1 ¹¹⁄₁₆ ³⁄₈ BKPA-PATH 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 BKRA-PATH 80G 3 ¹⁄₈ 1 ¹⁄₄ 265 plain bore 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ BKPA-PATH 80KF-12 3 ¹⁄₈ 1 ¹⁄₄ ball bearing (C) 4 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 BKPA-PATH 80KF 3 ¹⁄₈ 1 ¹⁄₄ 265 ball bearing (C) 4 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 BKRA-PATH 80KF 3 ¹⁄₈ 1 ¹⁄₄ 265 ball bearing (C) 4 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ BKPA-PATH 101G 4 1 ¹⁄₄ 265 plain bore 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 BKRA-PATH 101G 4 1 ¹⁄₄ 265 plain bore 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ BKPA-PATH 101KF-12 4 1 ¹⁄₄ ball bearing (C) 5 ³⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 BKPA-PATH 101KF 4 1 ¹⁄₄ 265 ball bearing (C) 5 ³⁄₈ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 BKRA-PATH 101KF 4 1 ¹⁄₄ 265 ball bearing (C) 5 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ BKPA-PATH 126G 5 1 ¹⁄₄ 265 plain bore 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 BKRA-PATH 126G 5 1 ¹⁄₄ 265 plain bore 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ BKPA-PATH 126KF-12 5 1 ¹⁄₄ ball bearing (C) 6 ⁵⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 BKPA-PATH 126KF 5 1 ¹⁄₄ 265 ball bearing (C) 6 ⁵⁄₁₆ 3 ⁹⁄₁₆ x 2 ⁵⁄₈ 2 31/32 x 1 25/32 / 2 13/32 x 2 1/16 BKRA-PATH 126KF 5 1 ¹⁄₄ 265 ball bearing (C) 6 ¹⁄₄ 2 ¹⁄₄ ¹⁄₂ -
PATH – Twin casters
The wheels in the PATH series can be provided as twin casters with the following rig series:
LDA series: Light duty twin wheel swivel rig with top plate fitting
LMDA series: Light duty twin wheel swivel rig with bolt holeA detailed description of the two rig series is available in the guide.
Wheel Ø
[inch]Wheel
width
[inch]Number of
wheels
Load capacity
at 1.9 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LDA-PATH 50G 2 ³⁄₄ 2 175 plain bore 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ¹⁄₄ LMDA-PATH 50G 2 ³⁄₄ 2 175 plain bore 2 ¹³⁄₁₆ 1 ⁵⁄₈ ³⁄₈ 1 ¹⁄₄ LDA-PATH 50KF 2 ³⁄₄ 2 175 ball bearing (C) 2 ¹³⁄₁₆ 2 ³⁄₈ x 2 ³⁄₈ 1 1/2 x 1 1/2 / 1 7/8 x 1 7/8 1 ¹⁄₄ LMDA-PATH 50KF 2 ³⁄₄ 2 175 ball bearing (C) 2 ¹³⁄₁₆ 1 ⁵⁄₈ ³⁄₈ 1 ¹⁄₄ LDA-PATH 75G 3 1 2 220 plain bore 4 2 ³⁄₈ x 2 ³⁄₈ 1 9/16 x 1 9/16 / 1 13/16 x 1 13/16 1 ⁵⁄₁₆ LMDA-PATH 75G 3 1 2 220 plain bore 3 ⁷⁄₈ 2 ³⁄₁₆ ³⁄₈ 1 ⁵⁄₁₆ LDA-PATH 75KF 3 1 2 220 ball bearing (C) 4 2 ³⁄₈ x 2 ³⁄₈ 1 9/16 x 1 9/16 / 1 13/16 x 1 13/16 1 ⁵⁄₁₆ LMDA-PATH 75KF 3 1 2 220 ball bearing (C) 3 ⁷⁄₈ 2 ³⁄₁₆ ³⁄₈ 1 ⁵⁄₁₆