Nylon wheels & nylon casters - POG series
With high-quality injection-moulded nylon
The wheels in the POG series are made from high-quality injection-moulded nylon and provide smooth running performance on even floors, combined with a high level of abrasion resistance. With a hardness of 70 Shore D, the wheels offer a particularly low level of rolling resistance on smooth surfaces. They are also resistant to many aggressive substances.
Due to its resistance, the POG series is frequently used for hygiene applications and in the food industry. The wheels are resistant to a wide range of cleaning agents and chemicals. Information about corrosion-resistant casters with a stainless steel rig is available in the stainless steel casters section. The SPOG series is suitable for handling heavy loads.
-
POG – Wheels
The POG series is available with diameters between 3 ¹⁄₈ and 10 inch as standard. Plain bores and ball bearings are available as standard. The ball bearings are also available in a corrosion-resistant or non-marking conductive version.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Axle bore Ø
[inch]Hub
length
[inch]POG 80/12G 3 ¹⁄₈ 1 ¹⁄₄ 485 plain bore ¹⁄₂ 1 ³⁄₈ POG 82/15K 3 ¹⁄₈ 1 ⁷⁄₁₆ 550 ball bearing ⁹⁄₁₆ 1 ³⁄₄ POG 89/15G 3 ¹⁄₂ 1 ¹⁄₄ 395 plain bore ⁹⁄₁₆ 1 ³⁄₄ POG 89/10KA 3 ¹⁄₂ 1 ¹⁄₄ 395 ball bearing (C) ³⁄₈ 1 ¹³⁄₁₆ POG 100/12G 4 1 ⁷⁄₁₆ 615 plain bore ¹⁄₂ 1 ³⁄₄ POG 100/15G 4 1 ⁷⁄₁₆ 615 plain bore ⁹⁄₁₆ 1 ³⁄₄ POG 100/10KA 4 1 ⁷⁄₁₆ 615 ball bearing (C) ³⁄₈ 1 ¹³⁄₁₆ POG 125/12G 5 1 ⁹⁄₁₆ 660 plain bore ¹⁄₂ 1 ³⁄₄ POG 125/15G 5 1 ⁹⁄₁₆ 660 plain bore ⁹⁄₁₆ 1 ³⁄₄ POG 125/10KA 5 1 ⁹⁄₁₆ 660 ball bearing (C) ³⁄₈ 1 ¹³⁄₁₆ POG 150/20G 6 2 880 plain bore ¹³⁄₁₆ 2 ³⁄₈ POG 150/20K 6 2 880 ball bearing ¹³⁄₁₆ 2 ³⁄₈ POG 160/20K 6 ⁵⁄₁₆ 2 990 ball bearing ¹³⁄₁₆ 2 ³⁄₈ POG 200/20G 8 2 1,325 plain bore ¹³⁄₁₆ 2 ³⁄₈ POG 200/20K 8 2 1,325 ball bearing ¹³⁄₁₆ 2 ³⁄₈ POG 250/25G 10 2 2,205 plain bore 1 2 ³⁄₈ POG 250/25K 10 2 2,205 ball bearing 1 2 ³⁄₈ -
POG – Swivel casters with plate
The POG series is available with various rig series with a top plate fitting. A variety of rigd are used depending on the application:
LEH series: Pressed steel swivel rig with top plate fitting, heavy duty design
LE series: Pressed steel swivel rig with top plate fitting
L series: Pressed steel swivel rig with top plate fitting, medium duty design
LK series: Pressed steel swivel rig with top plate fitting, heavy duty designThe guide provides a detailed comparison of the rig series which are available. The brake systems available for each base product are covered in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]Offset
[inch]LK-POG 82K-14 3 ¹⁄₈ 1 ⁷⁄₁₆ 550 ball bearing 4 ⁵⁄₁₆ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 1 ⁹⁄₁₆ L-POG 89G-12 3 ¹⁄₂ 1 ¹⁄₄ 395 plain bore 4 ¹¹⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁷⁄₁₆ L-POG 89KA-12 3 ¹⁄₂ 1 ¹⁄₄ 395 ball bearing (C) 4 ¹¹⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁷⁄₁₆ L-POG 100G-12 4 1 ⁷⁄₁₆ 550 plain bore 5 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁷⁄₁₆ L-POG 100KA-12 4 1 ⁷⁄₁₆ 550 ball bearing (C) 5 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ⁷⁄₁₆ LK-POG 100KA-14 4 1 ⁷⁄₁₆ 615 ball bearing (C) 5 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 1 ³⁄₄ L-POG 125G-12 5 1 ⁹⁄₁₆ 550 plain bore 6 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ¹⁄₂ L-POG 125KA-12 5 1 ⁹⁄₁₆ 550 ball bearing (C) 6 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 1 ¹⁄₂ LK-POG 125KA-14 5 1 ⁹⁄₁₆ 660 ball bearing (C) 6 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 1 ⁷⁄₈ LE-POG 150G-14 6 2 660 plain bore 7 ¹⁄₂ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈ LEH-POG 150K-14 6 2 880 ball bearing 7 ¹⁄₂ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈ LEH-POG 160K-14 6 ⁵⁄₁₆ 2 990 ball bearing 7 ¹³⁄₁₆ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₄ LE-POG 200G-14 8 2 660 plain bore 9 ¹⁄₄ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₈ LEH-POG 200K-14-01 8 2 770 ball bearing 10 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ¹⁄₂ LEH-POG 200K-14 8 2 1,255 ball bearing 9 ¹⁄₂ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 2 ³⁄₈ -
POG – Swivel casters with bolt hole
The POG series is also available with a bolt hole fitting as an alternative to a plate fitting.
LER series: Pressed steel swivel rig with bolt hole
A detailed description of the LER rig is available in the guide. More information about the brake system versions available for each base product is listed in the relevant section.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate Ø
[inch]Bolt
hole Ø
[inch]Offset
[inch]LER-POG 80G 3 ¹⁄₈ 1 ¹⁄₄ 330 plain bore 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-POG 80KA 3 ¹⁄₈ 1 ¹⁄₄ 330 ball bearing (C) 4 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-POG 100G 4 1 ⁷⁄₁₆ 330 plain bore 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ LER-POG 100KA 4 1 ⁷⁄₁₆ 330 ball bearing (C) 4 ¹⁵⁄₁₆ 2 ³⁄₄ ¹⁄₂ 1 ⁷⁄₁₆ LER-POG 125G 5 1 ⁹⁄₁₆ 330 plain bore 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-POG 125KA 5 1 ⁹⁄₁₆ 330 ball bearing (C) 5 ⁷⁄₈ 2 ³⁄₄ ¹⁄₂ 1 ¹⁄₂ LER-POG 150G 6 2 660 plain bore 7 ¹⁄₂ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-POG 150K 6 2 660 ball bearing 7 ¹⁄₂ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-POG 200G 8 2 660 plain bore 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ LER-POG 200K 8 2 660 ball bearing 9 ¹⁄₄ 3 ⁷⁄₁₆ ¹⁄₂ 2 ¹⁄₈ -
POG – Rigid casters
Blickle also provides suitable rigid casters in addition to swivel casters.
BES series: Pressed steel rigid rig with top plate fitting, heavy duty design
BEHS series: Pressed steel rigid rig with top plate fitting, heavy duty design
BKS series: Pressed steel rigid rig with top plate fitting, heavy duty design
B series: Pressed steel rigid rig with top plate fitting, medium duty designA detailed description of the rig series is available in our guide.
Wheel Ø
[inch]Wheel
width
[inch]Load capacity
at 2.5 mph
[lbs]Bearing type
Total height
[inch]Plate
dimensions
[inch]Bolt hole
spacing
[inch]Bolt
hole Ø
[inch]BKS-POG 82K-14 3 ¹⁄₈ 1 ⁷⁄₁₆ 550 ball bearing 4 ⁵⁄₁₆ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 B-POG 89G-12 3 ¹⁄₂ 1 ¹⁄₄ 395 plain bore 4 ¹¹⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 B-POG 89KA-12 3 ¹⁄₂ 1 ¹⁄₄ 395 ball bearing (C) 4 ¹¹⁄₁₆ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 B-POG 100G-12 4 1 ⁷⁄₁₆ 550 plain bore 5 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 B-POG 100KA-12 4 1 ⁷⁄₁₆ 550 ball bearing (C) 5 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 BKS-POG 100KA-14 4 1 ⁷⁄₁₆ 615 ball bearing (C) 5 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 B-POG 125G-12 5 1 ⁹⁄₁₆ 550 plain bore 6 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 B-POG 125KA-12 5 1 ⁹⁄₁₆ 550 ball bearing (C) 6 ¹⁄₈ 3 ⁵⁄₈ x 2 ¹⁄₂ 1 3/4 x 2 13/16-3 1/16 BKS-POG 125KA-14 5 1 ⁹⁄₁₆ 660 ball bearing (C) 6 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 BEHS-POG 150K-14 6 2 880 ball bearing 7 ¹⁄₂ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 BEHS-POG 160K-14 6 ⁵⁄₁₆ 2 990 ball bearing 7 ¹³⁄₁₆ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 BES-POG 200G-14 8 2 660 plain bore 9 ¹⁄₄ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 BEHS-POG 200K-14-01 8 2 770 ball bearing 10 ¹⁄₈ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3 BEHS-POG 200K-14 8 2 1,255 ball bearing 9 ⁷⁄₁₆ 4 ¹⁄₂ x 4 2 5/8 x 3 5/8 / 3 x 3